This panel adhesive has been developed as a slow curing, thixotropic easy to apply adhesive for bonding Honeycomb panels or composites requiring high performance from a manually applied product.
Panel Adhesives
A70 Panel+
£36.00 ex. VAT
Viscous two part and trowelable panel adhesive. Bonds Honeycomb panels and composites.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Cartridge Size: | 5kg Kit |
| Colour | Beige |
| Working time | 45 Mins |
| Fixture time | Pot Life: 60 Mins (Shelf life 6 months in unopened container) |
| Type | PU |
| Temperature Resistance | Service Temperature (-20°C – +120°C) |
| Strength | High 4 |
How to use
Coverage: Between 2 and 10m 2/kg/ This is dependant on the substrate being bonded and porosity and uniformity of them. Only one side application is required.
Application Temperature: 10°C to 30°C
Substrate Preparation: All surfaces should be free of contamination of dust, grease, oils or release agents. Substrate should be checked for contamination by mould release or cutting agents. Metals should be degreased prior to bonding. Cleaning solutions, if used, must be allowed to evaporate before application of the panel adhesive. Some metals (untreated aluminium and galvanised steel) may require priming to achieve a satisfactory permanent bond.
Bonding Range and Pressure: Substrates should be held together throughout the curing process. This is best accomplished in a press with up to 10 p.s.i pressure, however this will depend upon the weight of the substrates being bonded.
