Toughened epoxy resin A60 Brass+ is a typical two part system (a hardener and a resin) that, when mixed, will solidify due to polymerisation. This chemistry is very stable and can be modified and filled with ease, allowing us to attain a wide variety of cured attributes from a single base product. For example, silver can be added to attain conductivity, quartz fillers can be added to improve impact resistance.
This versatile chemistry produces typically long open times and rigid bonds, and is available in a range of viscosities; from flowable liquids to thixotropic pastes.
This structural adhesive is also famous for being a ‘fast grab’ solution, with a very useful 5 – 7 minutes of working time.
This epoxy has an enormous temperature resistance of between -55’C and +150’C. This industrial adhesive is a clear 1:1 bonder available in 50ml and 400ml cartridge sizes which travels through our dynamic mixer nozzle to form a very high strength bond.
Tips:
Use the working time wisely and bear in mind the very high bonding strength of this epoxy.
Have a ‘dry run’ first so that you know for certain you have the room to move across the application in one motion. You’ll be surprised at how much space you need!
Primers can increase the bond durability and surface tension for difficult to bond materials.
We recommend Metal Adhesives primer or Metal Adhesives UV Identifiable Primer to achieve the best results.
Use sufficient pressure over the whole surface at room temperature to ensure maximum adhesion to substrates.
If you want to “smooth out” or remove any excess from the bond, you should use gloves for your protection.
If part used, leave cured Nozzle on the cartridge and when next application is required, remove old nozzle and apply a fresh nozzle
Capable of filling gaps up to 3mm.
Check out our A60 Applicator Guns and Nozzles
